Where can I get a graphic of how the inside of a halogen pin socket works? I have a pair of expensive ceiling fixtures, each one has 3 hanging lights. A bulb burned out, I showed it to 2 different light stores and they each gave me the replacement bulb (A Feit and a Satco) but the replacements won't push into the socket. One of the pins actually broke off. The stores say the socket must be bad and needs to be replaced -- that's a big, difficult takedown problem. How can the socket be bad if the old dead bulb slides in an out easily? The spent bulb has no markings on it, but the Satco replacement is a 35W 12v S1910. Thank you.
-
Categories
-
Platforms
-
Content