DSP selection guide

Discussion in 'Audio' started by naumankalia, Jun 13, 2018 at 1:35 AM.

  1. naumankalia

    naumankalia

    Joined:
    Feb 11, 2018
    Messages:
    10
    Likes Received:
    0
    Hi all

    I am in search of DSP board which have at least 5 ADCs (16 bit, Bipolar, 192 K samples/s/channel) and one DAC (16 bi,t Bipolar, 192 K samples/s/channel). Please help me in this regard

    Thanks
     
    naumankalia, Jun 13, 2018 at 1:35 AM
    #1
    1. Advertisements

  2. naumankalia

    Nanren888

    Joined:
    Nov 8, 2015
    Messages:
    23
    Likes Received:
    2
    Board? What sort of board?
    When I needed audio capture, I bought RME equipment. Octamics if you need preamps included.
    Did you want stand-alone boards?
    What sort of processing do you need from the DSP?
     
    Nanren888, Jun 16, 2018 at 10:00 AM
    #2
    1. Advertisements

  3. naumankalia

    naumankalia

    Joined:
    Feb 11, 2018
    Messages:
    10
    Likes Received:
    0
    I need a standalone DSP board for learning purpose. If this board has an ADC and DAC then interfaces with external environment can also be exercised
     
    naumankalia, Jun 16, 2018 at 3:04 PM
    #3
  4. naumankalia

    Nanren888

    Joined:
    Nov 8, 2015
    Messages:
    23
    Likes Received:
    2
    People tend to have favourites in terms of which DSP & architecture they like.
    Which ones are you familiar with?
    For small projects, we often look for an evaluation board for the technology we want to use.
    Often just choose ther supplier & browse what they offer.
    5 ADCs at 192K samples per second, might be a big ask for evcaluation boards.
    .
    Do you specifically want a DSP chip/processor, as in programming DSPs, or more interested in learning about digital signal processing, as in proceesing?
    Would you consider an FPGA board?
     
    Nanren888, Jun 17, 2018 at 8:41 PM
    #4
  5. naumankalia

    naumankalia

    Joined:
    Feb 11, 2018
    Messages:
    10
    Likes Received:
    0
    Hi
    Thanks for help dear. I am more interested to learn programming DSPs chip/processors. ADCs and DAC quantity can be compromised, however, at least one ADC and one DAC is required so that i can also learn to interface DSP chips/processors with ADC/DACs.

    Thanks
     
    naumankalia, Jun 18, 2018 at 10:40 AM
    #5
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.