Maker Pro
Maker Pro

Daewoo monitor 710B problem with high voltage

  • Thread starter Robert Obermayer
  • Start date
R

Robert Obermayer

Jan 1, 1970
0
My Daewoo 710B (I got it for free) has a strange problem,probably with
the high voltage.

After it is switched on, it works some minutes without any
problems,however, it crackles quite loud.
Then it produces a loud SNAP noise,what probably comes from a spark
somewhere.
as it is rather loud, some significant energy probably is involved.
The picture gets SMALLER by 1/3 but gets back to normal size within a
second.
After a monute,the same thing happens again and the again with
increasing rate (up to 1HZ before i pulled the plug)

Any tips?
 
Top