Maker Pro
Maker Pro

Converting s19 file into prom config file

M

Martin Vasilevski

Jan 1, 1970
0
I need to convert a s19 file (for a Motorola 68hc11/12) into the config
file that goes in the PROM.

Does anyone know if there is some documentation on the format of the config
files (compared to the s19), or for that matter does anyone know how this
can be achieved.
 
A

Alan Holt

Jan 1, 1970
0
Are you sure you need to do this? Most commercial programmers, and some
hobby ones, need the information included in the s19 format to program the
chips.

Check the programmer's documentation to see if will be expecting the s19
format.
 
Top