Confounded blinking message - Samsung TSL3294HF TV

[dw]

It seems that whenever I'm viewing programming through one of the video
components connected to the external jacks, I get a flashing message: "UNIT
NOT CONNECTED TO JACKS." Sometimes the message appears 8-10 times a minute.
So far as I can tell, the connections are fine (this has happened using a
variety of cables and jacks). If anyone out there has encountered the same
problem or knows how to either override the message or fix the problem, I'd
really appreciate your input.

Thanks

 

[Jerry Greenberg]

It is possible that he connectors in your unit are starting to be
defective and require changing, or the solder connections under them
may be going cold, and require re-soldering.

If not then there may be some type of circuit fault. But, more likely
it is something with the connectors.

Jerry Greenberg

 

[Ken G.]

That is what you get ... it`s a Samsung , Samjunk , Samscum . that
brand is one of the worst , get rid of it