Maker Pro
Maker Pro

Chartplotter - Radar connection

michaelm110

Feb 27, 2010
1
Joined
Feb 27, 2010
Messages
1
I have a Standard Horizon CP180 Chartplotter, that is able to be connected to radar. The manual says to connect a Sitex MD1 to the unit. I have a similar radar, that looks identical. It is a JRC 1000. I'm wondering if the units are similar enough to use the JRC unit instead. This would save me over $1000. I've looked at the information on the 2 units online, and the specifications look very similar. Can you advise?
 

Similar threads

D
Replies
2
Views
1K
Roel Bouwman
R
M
Replies
0
Views
949
Michael Gardner
M
Z
Replies
4
Views
1K
Dennis Pogson
D
D
Replies
0
Views
1K
David Carrick
D
Top