Charger for 2S LiPo

[Ben King]

I would like to know what charger I should use for my 2S (7.4v) Dynamite Reaction LiPo, it has a 3C charge rate. I want the cheapest one !

 

[Externet]

Cheapest ? Pick the flavor of your choice :

----> https://www.aliexpress.com/wholesale?SearchText=7.4v+lithium+charger&opensearch=true

 

[Ben King]

Cheapest ? Pick the flavor of your choice :

----> https://www.aliexpress.com/wholesale?SearchText=7.4v+lithium+charger&opensearch=true

how would I make these circuit boards into a usable charger?

 

[Ben King]

the battery has a 3c charge rate which would mean it needs to be charged at 15A, I think, right. I am basing this off of what I have read off the internet so far

 

[Bluejets]

There is this one (or similar) if you want cheap.

Only problem that I can see is that, according to the front panel label, it is for Li-Pottery battery.
Never seen that version.

http://www.ebay.com.au/itm/7-4V-11-...hash=item3ced99d780:m:m974Jy0-zY5njv2MWpE5SNw

 

[Ben King]

There is this one (or similar) if you want cheap.

Only problem that I can see is that, according to the front panel label, it is for Li-Pottery battery.
Never seen that version.

http://www.ebay.com.au/itm/7-4V-11-...hash=item3ced99d780:m:m974Jy0-zY5njv2MWpE5SNw

so this will work:
(U.S. link)
http://www.ebay.com/itm/iMaxRC-iMax...hash=item283bcfaed7:m:mqKsB8aos4LCuzZvPLNOPiQ
it has a jst conection, and the other specs are on the link you gave me
I searched for 2S lipo baance charger on ebay

 

[Externet]

the battery has a 3c charge rate which would mean it needs to be charged at 15A...

Change "needs to be charged at" with "can be charged up to".
You do not push the throttle pedal to the floor all the time while driving, even when there is a couple of inches clearance left under it.
Its 150 horsepower engine is its maximum power capability; not the typical 20HP it yields in 'normal' driving

 

[Ben King]

oh right