CD spindle motors (Mabuchi)

[Sidney]

I need OEM part #'s for Mabuchi 5.9v DC motor generic # RF-300S-12350:

shaft length=12 mm/0.47" (a longer length is fine as I can cut it)
motor height=12mm/0.47"
motor diameter=24mm/0/94"

as this is a spindle motor out of a JVC dvd player
model:XV-523GD,year:2001 and JVC lists it as an assembly with the
spindle disc which has a reel counter underneath it and the plastic
housing with a photo-interrupter but JVC wants $52 for the whole thing
as the motor is not sold separately, I tried lubing it and running it
on my power supply at a slightly higher voltage but it still has bad
spots.
I can replace the motor alone I just need OEM part #'s for it as PRB
Belt co and other electronic parts suppliers list the bigger standard
sized RF-310T-XXXX series motors but not this smaller one. For your
info the JVC spindle motor assembly part # is:

JVC old # VDG1099001TSVME
JVC new # FXL-V6SPSV-2C

I can measure the spindle disc height of old motor prior to replacing.
Thanks in advance for help/replies.

Sidney
E-mail:[email protected]
Dartmouth, Nova Scotia
Canada

 

[Jerry G.]

You are best to find an old scrapper player like the one you have, and take
a chance of the motor is okay. I have had these go defective before.
Sometimes the one from the scrapper is also bad.

--

Jerry G.
======


I need OEM part #'s for Mabuchi 5.9v DC motor generic # RF-300S-12350:

shaft length=12 mm/0.47" (a longer length is fine as I can cut it)
motor height=12mm/0.47"
motor diameter=24mm/0/94"

as this is a spindle motor out of a JVC dvd player
model:XV-523GD,year:2001 and JVC lists it as an assembly with the
spindle disc which has a reel counter underneath it and the plastic
housing with a photo-interrupter but JVC wants $52 for the whole thing
as the motor is not sold separately, I tried lubing it and running it
on my power supply at a slightly higher voltage but it still has bad
spots.
I can replace the motor alone I just need OEM part #'s for it as PRB
Belt co and other electronic parts suppliers list the bigger standard
sized RF-310T-XXXX series motors but not this smaller one. For your
info the JVC spindle motor assembly part # is:

JVC old # VDG1099001TSVME
JVC new # FXL-V6SPSV-2C

I can measure the spindle disc height of old motor prior to replacing.
Thanks in advance for help/replies.

Sidney
E-mail:[email protected]
Dartmouth, Nova Scotia
Canada

 

[Tim Schwartz]

Hi,

MCM Electronics (www.mcmelectronics.com) has several of these in their
catalog at around $5USD each, though they might be catalogued as
cassette motors for some reason.

Regards,
Tim Schwartz
Bristol Electronics