Maker Pro
Maker Pro

Car Radio

davenn

Moderator
Sep 5, 2009
14,254
Joined
Sep 5, 2009
Messages
14,254
not sure what differences there are between the .....
TDF8556AJ/N3/M5 and the TDF8556AJ/N5/M5 ??


Hi,
Please tell me exactly you wish me to put my test probes.
I can then do as you say.

Thanks


he wanted you to check the yellow terminal on the cable loom in the car to make sure there was 12V there
 

ipbr21054a

Jun 10, 2012
44
Joined
Jun 10, 2012
Messages
44
Yes there is 12v in the loom on the car because its being used with the original radio now.
So im sure i dont need to check as otherwise this radio would also not work.

Cheers
 

davenn

Moderator
Sep 5, 2009
14,254
Joined
Sep 5, 2009
Messages
14,254
So im sure i dont need to check as otherwise this radio would also not work.

that's right ... I had forgotten abt trying another radio in there

and obviously Edd didn't read the whole thread LOL
 

davenn

Moderator
Sep 5, 2009
14,254
Joined
Sep 5, 2009
Messages
14,254
It is worth swapping that chip ... they are dirt cheap .... buy a spare haha

the real thing is ... do you think you have the skills to successfully unsolder it without damaging the circuit board tracks ?
 
Top