Maker Pro
Maker Pro

can i dodgy up a slipring connector?

donkey

Feb 26, 2011
1,301
Joined
Feb 26, 2011
Messages
1,301
hey peoples. anyone know how to make a home made slip ring connector?
I was hoping for 8 wires including data. I originally looked at headphone plugs and sockets but they stopped at 4, and am assuming would get noise on the line for data
as always your help is appreciated.
 

donkey

Feb 26, 2011
1,301
Joined
Feb 26, 2011
Messages
1,301
hey dorke thanks for this. after seeing the price I am thinking of making one more and more. might find a workaround to get me started.
at the end of my project I am looking at using about 6 of these
 

dorke

Jun 20, 2015
2,342
Joined
Jun 20, 2015
Messages
2,342
It is rated 220vac should be no problem with 24V.

But,It is rated 2A so it wouldn't carry 10A,5A and 3A.
For the 10A alone you would need 5+5=10 wires...
not enough wires in the gadget:(
 

donkey

Feb 26, 2011
1,301
Joined
Feb 26, 2011
Messages
1,301
going to try a few techniques might be able to make a home version that works. I only need about 60rpm with low noise. but kind of need to stay with the power ratings provided for the grand scheme of world domination
 
Top