Maker Pro
Maker Pro

Bootloader 908AZ60A

S

SFC

Jan 1, 1970
0
Anyone got a bootloader for the 908AZ60A? Or know a link to it?

SFC
 
N

News 2 Me

Jan 1, 1970
0
SFC said:
Anyone got a bootloader for the 908AZ60A? Or know a link to it?

P&E Microcomputer Systems (http://www.pemicro.com/) has a free
programmer and in-circuit debugger for HC908 MCUs. The software works
best with a full-blown MON08 interface and P&E's Mutlilink cable, but
I've used the software with half a MAX232, three resistors and two
diodes. See Freescale's AN2317 "Low-Cost Programming and Debugging
Options for M68HC08 MCUs." This application note describes building the
interface and configuring P&E's software to talk to what you've built.
I used the design in figure 5 with a 68HC908GP32 and it worked like a
champ.

NM
 
S

SFC

Jan 1, 1970
0
I used it myself but would like to program it without the programmer. I need
the pins for my application and don't want to use jumpers etc. I have
translated a gp32 bootloader into a ab32 but just wondered if there was a
plug and play version for the az60.

thanks any how...

SFC
 
Top