Maker Pro
Maker Pro

Ademco 6160 Alpha Display Backlighting

madskier98

Sep 7, 2012
1
Joined
Sep 7, 2012
Messages
1
Hi All,

I have just recently moved to a new (for me) house. It has a vista20p with all wireless contacts/motions and the aforementioned 6160 keypad. The trouble I am having is the backlighting of the Alpha display - the backlighting of the alpha display stops after about 30 seconds. It works just after powering up the system then after about 30 seconds it stops and won't backlight anymore. The numeric keypad backlighting works as advertised - they are backlit all the time.

I have looked for settings in the programming manual and also in the instructions for installing the keypad but haven't identified anything that can help me. Any ideas, direction or guidance anyone can provide would be very helpful.

Thanks in advance!
 
Top