E
Ed
- Jan 1, 1970
- 0
I am running my 89C450 MCU at 29.491mhz
I need to generate a clock output at 500khz for another device without
adding more components.
I was thinking about using one of the timers, but dont know how.
I am already using timer 1 for the serial port baud generator.
Any help would be apreciated.
I need to generate a clock output at 500khz for another device without
adding more components.
I was thinking about using one of the timers, but dont know how.
I am already using timer 1 for the serial port baud generator.
Any help would be apreciated.
