Maker Pro
Maker Pro

7S125 behaviour when the enable changes slowly

Staffan Cronstrom

Dec 6, 2016
5
Joined
Dec 6, 2016
Messages
5
Anybody who knows how a 7S125 (tri-state buffer) will behave when the ENABLE (pin 1 on a SOT23) input goes from high to low very slowly, in the order of several milliseconds to go all the way from high to low?
Can it occur that the output (pin 4 on a SOT23) takes on low or high for a short moment during the change, independently upon the input (pin 2 on a SOT23)?
Same question for slow low to high.
/SC
 

AnalogKid

Jun 10, 2015
2,884
Joined
Jun 10, 2015
Messages
2,884
Please post a datasheet of the part, and post your schematic.

ak
 
Top