Maker Pro
Maker Pro

240V LED driver.... Want to convert to 120V

OffGrid-on-Rocker

Sep 11, 2014
13
Joined
Sep 11, 2014
Messages
13
These LED drivers are 240V. If I try to run them on 120V they pulse at what I guess would be about 30 hertz. I was wondering if it would be possible to change the value of some resistors to make them work at 120 Volts. If so, suggestions would be appreciated.
I am enclosing some pictures and a link to the Driver chip. Please excuse the crude labels.
Thanks

http://www.datasheetspdf.com/mobile/950943/CL1502.htmllabel.jpg no label.jpg top.jpg
 

Bluejets

Oct 5, 2014
6,901
Joined
Oct 5, 2014
Messages
6,901
In overview in the specs it says 85 to 265v ac
As a general note it also says ...Non-Isolated !!
 
Top