Connect with us

ZZx10 Powerline Communication

Discussion in 'Misc Electronics' started by garrett, May 9, 2007.

Scroll to continue with content
  1. garrett

    garrett Guest

    Hi,

    I use x10 Powerline Communication to allow me to switch devices on and off.
    I use x10 modules plugged into devices that switch the power on and off.
    One lamp I have plugged into the module seems to draw too much current.
    When I turn the module off with an x10 signal, the light goes off for a
    couple seconds, but then turns back on. Does anyone know why this happens
    or a way around the problem?

    Thanks.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-