Connect with us

Zoertia/contiki data upload to things.ubidots.com

Discussion in 'Microcontrollers, Programming and IoT' started by usmanOnpoints, Apr 16, 2016.

Scroll to continue with content
  1. usmanOnpoints

    usmanOnpoints

    1
    0
    Apr 16, 2016
    I have two z1 motes and wants to upload temperature data to cloud using website things.ubidots.com

    I followed all the steps that described in given link:

    https://www.hackster.io/4348/zolertia-ipv6-6lowpan-ubidots

    Border Router terminal log:
    ************SLIP started on ``/dev/ttyUSB1''
    opened tun device ``/dev/tun08''
    ifconfig tun08 inet `hostname` up
    ifconfig tun08 add 2001:582:37:19d2::/64
    ifconfig tun08 add fe80::582:37:19d2:0/64
    ifconfig tun08
    tun08 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
    inet addr:127.0.1.1 P-t-P:127.0.1.1 Mask:255.255.255.255
    inet6 addr: 2001:582:37:19d2::/64 Scope:Global
    inet6 addr: fe80::582:37:19d2::0/64 Scope:Link
    UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1
    RX packets:0 errors:0 dropped:0 overruns:0 frame:0
    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:500
    RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)**
    *** Address:2001:582:37:19d2:: => 2001:0582:0037:19d2
    Got configuration message of type P
    Setting prefix 2001:582:37:19d2::
    Server IPv6 addresses:
    2001:582:37:19d2:c30c::1e6
    fe80::c30c:0:0:1e6**


    Added Ubidots variable Ids in project-conf.h & one in Makefile as well

    running Ubidots-demo.c on another z1 mote here are logs:

    Ubidots client: STATE_RESOLVING (3)
    Ubidots client: STATE_RESOLVING (3)
    Ubidots client: STATE_RESOLVING (3) > Ubidots client: STATE_RESOLVING (3)
    Ubidots client: STATE_RESOLVING (4)
    Ubidots client: STATE_RESOLVING (4)

    If some one else did this successfully or faced same errors
    Please help me here to figure out this stuff, or tell me where I m wrong.

    This is really really important for me to solve.
    Any help will be much appreciated.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-