Connect with us

Zilog Z8 MCU programming

Discussion in 'Microcontrollers, Programming and IoT' started by bigone5500, Sep 3, 2016.

Scroll to continue with content
  1. bigone5500

    bigone5500

    712
    120
    Apr 9, 2014
  2. Herschel Peeler

    Herschel Peeler

    401
    65
    Feb 21, 2016
  3. bigone5500

    bigone5500

    712
    120
    Apr 9, 2014
    I have programmed a basic stamp and an arduino (AVR MCU), both with software interfaces.

    I guess I should have stated that I wanted to know if this chip can be programmed with readily available software. The software is available on Zilog's site so that is answered. However, is this chip really worth my time to salvage??? I'm thinking that since it is the only one I have, then probably not.

    Bah...dead end thread.
     
  4. Herschel Peeler

    Herschel Peeler

    401
    65
    Feb 21, 2016
    If it is your only one, I would say no. It was used a lot in autodialers ... a long time ago.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-