Connect with us

Zenith SC2503G 9-446, 9-516, 9-467

Discussion in 'Electronic Repair' started by ron350, Dec 7, 2003.

Scroll to continue with content
  1. ron350

    ron350 Guest

    Zenith SC2503G with boards 9-446, 9-516, and 9-467. This 1986 model
    set has the clasic "jail bars" look. From other tips i know to replace
    C3412, C3413,and R3463 on main board 9-516. I think there was another
    cap that caused "jail bars" on board 9-516. And of corse i don't have
    a Sams with a 9-516 on it.
    Thanks for your help Ron.
  2. Jonesy

    Jonesy Guest

    check for a 20uf cap on the Abl line that could cause jail bars on this
    board. good luck
  3. ron350

    ron350 Guest

    Thanks Jonesy do you know the location # ( Cxxxx ) for that 20uf
    cap???? Without a schematic will not be able to find Auto Black Level
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day