Connect with us

Zenith PVY5265DT keeps blowing QX3502

Discussion in 'Electronic Repair' started by Andy Cuffe, Mar 18, 2005.

Scroll to continue with content
  1. Andy Cuffe

    Andy Cuffe Guest

    I'm working on a Zenith PVY5265DT projection TV (from 1997). It came
    in with QX3502 shorted and an open fuse in the power supply. I
    replaced the fuse, QX3502 and the HV splitter because it was drifting
    out of focus. Everything seemed normal for several days of running it
    all day. About a month later the set came back with the same problem.
    QX3502 is part of the HV regulator circuit.

    I know the later Zenith projections TVs are full of desing problems
    and common failures. Has anyone seen anything like this before?
    Andy Cuffe

    <-- Use this address until 12/31/2005

    <-- Use this address after 12/31/2005
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-