Connect with us

Zenith H2532Y hotel TV menu?

Discussion in 'Electronic Repair' started by Bruce W.1, Mar 10, 2006.

Scroll to continue with content
  1. Bruce W.1

    Bruce W.1 Guest

    Can anyone tell me how to get at the settings menu for a Zenith H2532Y
    television? This TV is in my hotel room and it has all the normal
    settings menus (brightness, contrast, etc.) disabled. It needs a few

    I bought a Philips universal remote control and went thru all the codes
    for Zenith but still no luck.

    On the front of the TV it has a button labeled "Caption" and four
    unmarked buttons, in addition to the volume, channel, and power

    I'd also like to access the low level programming menus (menu, 9, 8, 7,
    6, enter) but I can't even get at the top level menu.

    Thanks for your help.
  2. Guest

    You need the hotel programming remote control in order to make any
    No universal carries the correct codes to do this.
  3. Mike Berger

    Mike Berger Guest

    Ask the hotel to send someone with the proper setup remote.

    Just an anecdote: I used to stay at the Radisson when I
    regularly attended the Dayton Hamvention. I told the desk
    I had reprogrammed the channels because it wasn't set up
    correctly. They told me that after the Hamvention guests
    left, they sent someone to every room to set the TV's back
    the way they were supposed to be.
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day