Connect with us

zenith factory menu

Discussion in 'Electronic Repair' started by . ., Aug 10, 2005.

Scroll to continue with content
  1. . .

    . . Guest

    Hi, personal set, Zenith Advanced System 3, model # SJ5775Y

    Can someone please tell me how to get to, (or point to a website) the
    factory menu page which will allow me to set B/W tracking?

    I can get to the service menu, via hold menu--9-8-7-6--enter, then to
    the "version"---(V-684-03-147) and using adjust, it toggles between
    "factory mode" ON, or OFF, (Not "1"& "0")... I do not see any of the
    advanced controls when it goes to factory ON, using menu only goes to
    the other page...

    What comes next to access the cutoffs and drives?

    All 3 guns are good, has NO pots on board or CRT neck bd
    any help appreciated
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-