Connect with us

Yenka and PCB Creation

Discussion in 'PCB Layout, Design and Manufacture' started by Nala, Nov 1, 2017.

  1. Nala

    Nala

    24
    1
    Feb 21, 2015
    Hi

    I am looking for some help specifically relating to the YENKA software.

    My single problem is that when adding a 4017 IC to a circuit it presents a symbol representing the IC yet there is no where to add a +Voltage to the 4017 symbol. As a consequence when using the PCB engine to design the layout non is added so the IC is not connected to power. The simulator seems to know it should be connected but the PCB engine does not.

    Can anyone advise how to overcome what seems to be a simple problem!

    Any help appreciated is is driving me crazy !!!
     
  2. kellys_eye

    kellys_eye

    4,284
    1,145
    Jun 25, 2010
    Can you edit/create components? You might be able to modify the file through such a facility.
     
  3. hevans1944

    hevans1944 Hop - AC8NS

    4,214
    1,994
    Jun 21, 2012
  4. Tac Eht Xilef

    Tac Eht Xilef

    7
    5
    Sep 6, 2014
    Nala and hevans1944 like this.
  5. Nala

    Nala

    24
    1
    Feb 21, 2015
    Thanks for your help, I thought it would be something simple and it was. You simply add a Vdd connector to the supply you wish to connect to you IC and it does it automatically.
     
  6. (*steve*)

    (*steve*) ¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd Moderator

    25,178
    2,690
    Jan 21, 2010
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads
There are no similar threads yet.
Loading...
Electronics Point Logo
Continue to site
Quote of the day

-