Connect with us

Yamaha RX-V495 failure

Discussion in 'Troubleshooting and Repair' started by SandingValve, Dec 5, 2010.

  1. SandingValve

    SandingValve

    2
    0
    Dec 5, 2010
    Hello all,

    I've got a Yamaha RX-V495 that immediately shuts off when the power button is pressed. If the diagnostic function is activated it briefly shows 'PS <some value below 100%>' before shutting off.

    It does this with nothing connected to it.

    Any clues?

    Thanks,
    SV
     
  2. davenn

    davenn Moderator

    13,290
    1,756
    Sep 5, 2009
    probably a power supply problem

    without some test it is difficult to say if it is an under or over power fault

    do a google search for a service manual and if your technically minded enough you may want to check the various power suppply rails and see if they are all working within tolerance.

    Dave
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-