Maker Pro
Maker Pro

Yamaha HTR-5890 NO OUTPUT

Has anyone had an issue with the HTR-5890 where there is no output
from any channel, including the pre-outs and the headphone outputs,
except the subwoofer output? The unit powers on fine and all the video
switching is fine, but the only sound comes from the subwoofer out
jack. I was reviewing the service manual and it looks like the input
selector IC-502 and IC 503 control the audio switching, it seems that
they are not passing the audio. Any help would be appreciated.
 
M

Meat Plow

Jan 1, 1970
0
Has anyone had an issue with the HTR-5890 where there is no output
from any channel, including the pre-outs and the headphone outputs,
except the subwoofer output? The unit powers on fine and all the video
switching is fine, but the only sound comes from the subwoofer out
jack. I was reviewing the service manual and it looks like the input
selector IC-502 and IC 503 control the audio switching, it seems that
they are not passing the audio. Any help would be appreciated.

Borrow a scope.
 
M

Mark D. Zacharias

Jan 1, 1970
0
Has anyone had an issue with the HTR-5890 where there is no output
from any channel, including the pre-outs and the headphone outputs,
except the subwoofer output? The unit powers on fine and all the video
switching is fine, but the only sound comes from the subwoofer out
jack. I was reviewing the service manual and it looks like the input
selector IC-502 and IC 503 control the audio switching, it seems that
they are not passing the audio. Any help would be appreciated.

Maybe no 3.3 volt line to the DSP? I'm not sure if that line is monitored by
the protect circuit.

Mark Z.
 
Top