Connect with us

Yamaha fuel management gauge NMEA hookup

Discussion in 'Boat Electronics' started by Kurt S., Nov 24, 2003.

Scroll to continue with content
  1. Kurt S.

    Kurt S. Guest

    I installed a Garmin 2006 yesterday and it talks to everything--so
    far. I see it is using NMEA version 2.3, and its only speed output is
    in the GPRMC sentence.

    This boat has the Yamaha engine management system that includes the
    fuel management gauge. I understand the fuel management gauge accepts
    NMEA inputs. Of course, there is little documentation of this, and
    Yamaha has no customer service--other than to tell you to call your
    clueless dealer.

    The instructions (what little there are) tell you to flip a dip switch
    to select NMEA for speed input, but it does not tell you which wire(s)
    to use. DOH!

    Has anyone hooked one of these rascals to a GPS to get MPG info?
    Which wires are what?

    Thanks in advance for your help.

Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day