Connect with us

XLR adapter for the XL1-S?

Discussion in 'Electronic Basics' started by Daniel Kelly \(AKA Jack\), Oct 18, 2004.

Scroll to continue with content
  1. Hi there,

    Does anyone know of a good XLR microphone adapter for the Canon XL1-S DV
    camera? I know that Canon do their own adapters (the MA-100, -200 and -300)
    but none of them have phantom power or the ability to switch between line
    and mic level inputs.

    Here's my ideal XLR adapter:

    - 48v phantom power
    - switchable between mic and line level inputs
    - at least 2 channels, 4 would be cool
    - powered directly from the camera
    - power efficient
    - attaches to the XL1-S in an elegant way

    Does anyone know of any adapters that fulfil at least half of these

  2. rIO

    rIO Guest

    Does anyone know of a good XLR microphone adapter for the Canon XL1-S DV

    My solution consists in an Ma-100 plus an expernal phantom power supply.
    The cable goes from the mic to the phantom supply and then to the adapter.
    Works fine and the power supply works with batteries or power cable, it
    costs about 60$ and it's big as two cigarette boxes.
  3. Cool, thanks for the info.

    Do you ever get problems with ground loops causing you to pick up mains hum?

Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day