Connect with us

xenon lamp trigger

Reply to Thread

Discussion in 'General Electronics Discussion' started by tnnelectro, Dec 3, 2018.

Scroll to continue with content
  1. Dec 3, 2018 #1
    tnnelectro

    tnnelectro

    47
    0
    Apr 5, 2012
    Hi,

    a confirmation to avoid the worst ...

    To change the lamp, I have to desolder the wires from the lamp and the trigger transformer ...

    the only thing I did not remember, the common trigger wire if it was combined with the positive or negative of the lamp

    and so I had to get the wiring diagram to understand!

    Question: the common trigger transformer, given the scheme that I got, must be connected on the positive lamp ... right?

    Attachments
     

    Attached Files:

  2. Dec 3, 2018 #2
    kellys_eye

    kellys_eye

    4,275
    1,146
    Jun 25, 2010
    Presumably you're talking about the 'straight red line'? This usually wraps around the xenon tube and doesn't actually connect to anything on the tube itself.
     
  3. Dec 4, 2018 #3
    tnnelectro

    tnnelectro

    47
    0
    Apr 5, 2012
    yes I know, in fact the wire wraps the tube of the lamp ...

    I mean the trigger common, should it be connected to the lamp's positive as circled with red in the scheme?
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Schematic circuit xenon lamp

  2. Synchronous flashing xenon lamp problem.

  3. Xenon Strobe repair

  4. Looking for some kind of lamp relay/trigger

  5. Trigger Strobe

  6. Xenon flash tube parts question

  7. Xenon flash tube missing flashes.

  8. Schmitt Trigger

Loading...
Electronics Point Logo
Continue to site
Quote of the day

“”

-