Connect with us

Xantrex inverter magic smoke

Discussion in 'Home Power and Microgeneration' started by [email protected], May 25, 2012.

Scroll to continue with content
  1. Guest

    Any of you bright fellows ever get into a Xantrax 1000 inverter?
    (XPower 1000) I have one here that leaked all the magic smoke out of 2
    Mosfets to the point I cannot read the part mumbers. There are 4
    devices on one side and 10 on the other. The 2 fried devices are the
    second and fourth of the four, counting from the DC IN end. The 2 that
    are left are 1404 N-Channel fets, I suspect the dead ones are P
    channels, but they could be N Channel as well. If P Channel I'm
    suspecting the number will be 4905, but that is also just a somewhat
    educated guess. -or even just a S.W.A.G.
     
  2. Guest

    Ask you question on one of the alternate power groups on Yahoo, such
    as http://groups.yahoo.com/group/12VDC_Power/?yguid=324544628
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-