Connect with us

X360 Potentiometer Joystick + HT12D

Discussion in 'General Electronics Discussion' started by MstrKurt, Dec 5, 2012.

Scroll to continue with content
  1. MstrKurt

    MstrKurt

    30
    0
    Jun 13, 2011
    Hey guys, I'm looking for some help in developing and idea for a motor controlled buggy.

    The chips being used for the Transmitter and Receiver are the HT12A and the HT12D

    Tx: http://www.rapidonline.com/electronic-components/ht12a-12e-remote-control-encoders-36710/

    Rx: http://www.rapidonline.com/Electron...070/?sid=e6b4a79d-0235-463e-8601-10a1115584da

    The idea is to have an xbox 360 joystick (http://www.conrad-uk.com/ce/en/product/425624/98002C3-10K-Joystick-Potentiometer) to control the buggy (with the amount of pressure applied to the joystick controlling the speed and the direction controlling the direction the robot moves in)

    I will need an analog to digital converter, but is it possible to get the full functionality of the joystick to control the motors with the chips selected?.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-