Connect with us

WTD Display for Fluke 79 Series II

Reply to Thread

Discussion in 'Electronic Equipment' started by ka2fwc, Oct 1, 2007.

Scroll to continue with content
  1. Oct 1, 2007 #1
    ka2fwc

    ka2fwc Guest

    I need the LCD display for a Fluke Model 79 Series II. (not series 3). It is
    a smaller display. The one I have, has a problem with the crystal leaking
    inside the display . Fluke says the display is no longer available (after
    they sent me the wrong display).
    Contact items4sale (at) bellsouth.net
    Thanks
    Frank
     
  2. Oct 1, 2007 #2
    JANA

    JANA Guest

    Your best bet is to see if there are any meters in any condition for sale on
    eBay or any of those auction sites.

    Or, it may be time to buy a new Fluke meter!

    --

    JANA
    _____


    I need the LCD display for a Fluke Model 79 Series II. (not series 3). It is
    a smaller display. The one I have, has a problem with the crystal leaking
    inside the display . Fluke says the display is no longer available (after
    they sent me the wrong display).
    Contact items4sale (at) bellsouth.net
    Thanks
    Frank
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Fluke 79 III (series III) service manual

  2. Fluke 79 acting up

  3. Fluke 105 Series II scopemeter fading LCD

  4. Fluke DMM model 77 series I and II schematic request

  5. Fluke 79 -- Rotary switch turns past last setting

  6. IBM WHEELWRITER 30 SERIES II

  7. WTD: Service info for Fluke 900 test fixture

  8. Fluke 6080a Display Problem

Loading...
Electronics Point Logo
Continue to site
Quote of the day

“”

-