Connect with us

WTB: Mallory/Sprague Photoflash Capacitors 140/450V Low ESR...

Discussion in 'Electronic Components' started by John Robertson, Jun 30, 2007.

Scroll to continue with content
  1. Looking for a few (5ish) 140/450VDC low ESR caps as used for Strobe
    light power supplies. These have two 10/32 bolts on raised studs on one
    end (Radial-like) and are series 36D POWERLYTIC.

    Thanks,

    John :-#)#
    --
    (Please post followups or tech enquires to the newsgroup) John's
    Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 Call
    (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, Video Games)
    www.flippers.com "Old pinballers never die, they
    just flip out."
     
  2. clifto

    clifto Guest

    Just a thought: the flash units in throwaway cameras have nice 120 uF
    330V caps on them, most likely low ESR. The ones I'm looking at are
    Rubycon and marked "PHOTO-FLASH".
     
  3. Boris Mohar

    Boris Mohar Guest

    Throwaway cameras use throwaway parts.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-