Connect with us

WTB: Front handle for Wavetek 3001 or similar

Discussion in 'Electronic Equipment' started by Al, Mar 9, 2007.

Scroll to continue with content
  1. Al

    Al Guest

    I was wondering if anyone might have some spare parts for a Wavetek
    model 3001, 3002, or 3000, such as a front handle and/or modulator
    board.

    I bought a 3001 AS-IS on eBay recently that works, except for a slight
    moddulator problem, but it is missing the left front handle. I believe
    both handles are the same part. I would like to make this into a good-
    working and ok-looking generator, so I would appreciate any help in
    getting parts for it.

    Thanks,
    Al, WA2AS
     
  2. Lionel

    Lionel Guest

    Just a thought, but it might be a lot easier & cheaper to find a
    matching pair of new, vagely similar handles, rather than trying to
    find the exact spare part to match the remaining handle.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-