Connect with us

Working out required track width

Discussion in 'PCB Layout, Design and Manufacture' started by Rajinder, Mar 22, 2018.

  1. Rajinder

    Rajinder

    351
    6
    Jan 30, 2016
    Hi all
    I have a question regarding PCB track width.
    If i have 1oz copper. I have an external EEPROM connected to my PIC micro via I2C interface. How do i obtain the correct track width and length. I have positioned the EEPROM clise to the PIC to minimise track length. I am using Eagle PCB.

    On the same PCB i have mains to power the PCB. Again please could you advise on track width but also ideas on creepage and clearance.

    Thanks.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-