Connect with us

Work trailer power system

Discussion in 'General Electronics Discussion' started by alex tuck, Oct 5, 2015.

Scroll to continue with content
  1. alex tuck

    alex tuck

    1
    0
    Oct 5, 2015
    So i am not an electronics guy to say the least. I am a general contractor. I know a little bit about electricity but not a hole lot. I am trying to build a power system for my work trailer. That i can use for interior lights and charge the 20v batteries for my drill.
    I have most of it figured out. But i need a programable timer that will turn power on the the inverter/ 20v drill battery charger then turn off after 1 hour of receiving power
     
    Last edited by a moderator: Oct 5, 2015
  2. Bluejets

    Bluejets

    4,296
    912
    Oct 5, 2014

    Attached Files:

Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-