Maker Pro
Maker Pro

wollensak 2772 duplicator pinch roller question

B

b

Jan 1, 1970
0
I have a Wollensak/3M 2772 cassette duplicator (imported from the USA
judging by the rear plate) This brand does not seem to be common in
Europe. As such I am having trouble locating spares through my usual
channels. I am looking at finding a supplier in the UK (preferably) or
Europe. Perhaps somebody could help.....

I need pinch rollers or a method of replacing the tires on the
existing
ones.

If I could find a "tyre" with an inside diameter of .420" and an
outside diameter of .500, and a height of 1/4" or so, I could make
that work.

The pinch roller is very unusual in that it is supported from one end
only and regular pinch rollers will not work. The nearest I have come
so far is experimenting using some tyres off old Philips cassette
decks, but they are in ropey condition due to age!

Any ideas? thanks, Ben
 
Top