Connect with us

Wiring volume pedal

Discussion in 'Troubleshooting and Repair' started by tuato, Mar 22, 2018.

Scroll to continue with content
  1. tuato

    tuato

    3
    0
    Sep 18, 2010
    Hi all, i need some help. I've got an old ibabez VL10 volume pedal, two inputs and two outputs, it's very old, and the connectors are broken, I just want to make it mono, so i only need one input and one output. The potentiometer is stereo and i don't know hot to wiring the stereo pot with the two stereo jacks............ Could you help me?? Thanks.

    PD: The pedal has another things like, one volume/balance switch, and min/max potentiometer but these are disabled, i'm not interested in use them.
     

    Attached Files:

  2. Tha fios agaibh

    Tha fios agaibh

    2,115
    713
    Aug 11, 2014
    I would put a 470Ω resistor in-line (series) with each input line and a 20kΩ across (parallel) outputs A and B to couple the two signals. Leave everything else as it is.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-