Maker Pro
Maker Pro

wireless link radio control

stevee

Jul 10, 2011
1
Joined
Jul 10, 2011
Messages
1
Hi
I Fly model helicopters and part of this is the use of a simulator.
The simulator uses the every day transmitter (futaba 10c) and connects to a pc using a lead which is connected between the trainer port at the rear of transmitter and a usb port.
This lead uses an anti pirate coding and so has to be used.

Basically the trainer port of the Transmitter is sending out PPM signals which is sent to the pc through the lead.

What I would like to be able to do is send the signal from the Transmitter to the simulator cable wirelessly. So that I can tuck all the cabling behind my pc and connect wirelessly

Any ideas?

Simulator: Phoenix rc
rtm3000-450.jpg
 
Top