Connect with us

Wireless Digital Transmitter/Receiver for connecting two FPGA evaluation boards

Discussion in 'Electronic Basics' started by Patrick Twomey, Sep 30, 2003.

Scroll to continue with content
  1. I am trying to connect two FPGA development boards together and am
    wondering does anyone know of any products to suit. The boards in
    question are two Celoxica RC100 development boards. Video in is from an
    analog camera. The video data is converted to digital and stored on
    SRAM. There is an expansion header for inter-connectivity. On the other
    board video out to a monitor occurs after reading data from the SRAM on
    this board. Have connected to two boards via a ribbon cable connected to
    the expansion headers. Want to replace this cable with wireless or
    optical transmission. Is there any development boards available for
    this. The pixel clock is 10 MHz and there are at least 16 bits per pixel
    (32 aftere error correction encoding). Access to a 80 MHz on board clock
    is available. Any help would be much appreciated.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-