Maker Pro
Maker Pro

wireless auto release

Toota

Sep 9, 2013
1
Joined
Sep 9, 2013
Messages
1
i am trying to design a remote controlled
wireless lifesize pop up (from 180 degrees to 90 degrees)of a cardboard cutout.I need to have 8 cardboard cutouts that will pop up from their flat position on the ground to standing upright.Power needs to be from batteries as no power is available.Obviously cost is huge concern in this project can anyone help.Thanks toota:)
 

CDRIVE

Hauling 10' pipe on a Trek Shift3
May 8, 2012
4,960
Joined
May 8, 2012
Messages
4,960
Building your own combat range?

Chris
 
Top