Connect with us

wire nuts

Discussion in 'Electrical Engineering' started by E Z Peaces, Sep 11, 2009.

Scroll to continue with content
  1. daestrom

    daestrom Guest

    Actually, the UL approval is based on installing in accordance with
    *manufacturer's directions*. So if the manufacturer says to not twist
    the wires, that is how UL tests it and that is the only 'approved' method.

    Of course if the manufacturer says twisting the wires is 'optional',
    then UL tests it both ways and the approval is based on that.

    "If all else fails, RTFM"

    daestrom
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-