Connect with us

Wire awg for pulsed current applications

Discussion in 'Electrical Engineering' started by MarkWilliams, Nov 18, 2009.

Scroll to continue with content
  1. MarkWilliams


    Nov 18, 2009
    I'm designing a 120VAC capacitor clearing machine. It uses a transformer connected across a metalized film capacitor via a SSR. It should produce a pulse about 60A rms < 2 sec. I'm looking for a formula to calculate the awg for the wire at 20% duty cycle. Any help would be appreciated.

    Thank You
    Mark Williams
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day