Connect with us

Will this synthesizer work?

Discussion in 'Audio' started by j4cobgarby, Jan 27, 2019.

  1. BobK

    BobK

    7,607
    1,648
    Jan 5, 2010
    As others have pointed out, you cannot use the same resistor for 3 oscillators. What was your intent with the 3 oscillators anyway?

    Bob
     
  2. BobK

    BobK

    7,607
    1,648
    Jan 5, 2010
    Here is a simulation of a single tone generator using a 555. I give three outputs, square, sine and triangle, scaled to be about the same amplitude.

    R1 controls the frequency, with 1K giving you about 650 Hz. Note that in order to maintain the same wave shapes, R1 and R2 must be modified in concert, with R2 10 times R1.

    The waveforms are not meant to be pure and undistorted, they are what you can get easily with a 555.

    Also note that R5, R6 and R7 represent the load on your summer. The outputs are fairly high impedance, so use summing resistors of 10K to get the level of output I show.

    upload_2019-2-1_9-41-4.png
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-