Connect with us

Will pay $200-$300 to member to modify DLP system

Wanted: Discussion in 'For Sale / Wanted' started by HoloJustin, May 30, 2013.

Thread Status:
Not open for further replies.
Scroll to continue with content
  1. HoloJustin


    May 30, 2013
    Hello all!

    In my introduction post I alluded to the work I need done

    and it goes a little something like this

    I will pay someone to render one of these (or similar)

    down to a bare operating DMD that I can use on my laser table.

    To my knowledge this will entail spoofing the system into believing the projection lamp and color wheel are still attached and operating (among other daunting tasks).

    The removal of the lamp and color wheel are my two primary concerns; Holograms need to be exposed in the dark and said lamp will spoil my film and ruin the whole operation, while the spinning color wheel will create vibration that also ruins holograms.

    As far as the rest of the details of the mod, I'm at a loss. This is why I'm willing to pay.

    So, there it is - a few hundred bucks to whomever can essentially turn DLP TV guts into a DMD developer kit; nothing attached to the DMD board except power in and a DVI input from my PC.

    As of Thur May 30, I am only a few days away from being able to purchase the aforementioned TV guts, and could have one shipped to you for the modifications in short order.

    Please contact me if this job interests you.

    edit: for more information see here:
    Last edited by a moderator: May 31, 2013
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Thread Status:
Not open for further replies.
Electronics Point Logo
Continue to site
Quote of the day