Connect with us

Why a GIG PHY only works in 100M mode

Discussion in 'Electronic Design' started by [email protected], Jun 6, 2007.

Scroll to continue with content
  1. Guest

    Hi guys:
    I was stuck..
    My GIG PHY can only work at 100M mode.
    At 1000M mode, PHY can only receive ,but can not transmit
    I am sure software and driver are right,and all TX and Rx
    lines are terminated, clock is OK.
    Could anyone provide advices?
    Thanks a lot

  2. Ask on a computer newsgroup.

    Service to my country? Been there, Done that, and I've got my DD214 to
    prove it.
    Member of DAV #85.

    Michael A. Terrell
    Central Florida
  3. Ben Jackson

    Ben Jackson Guest

    The TX clock for gig goes the other way and is on another pin (probably
    called something like GTXCLK).
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day