Connect with us

Who knows what kind of connector

Discussion in 'Datasheets, Manuals and Component Identification' started by laykonik, Feb 25, 2017.

Scroll to continue with content
  1. laykonik

    laykonik

    1
    0
    Feb 25, 2017
    I need to connect to the original unit, and the need to identical connector.
    Does anyone know what is the connector?
    Who is the manufacturer.
    4 pin spacing of 2.54 mm (100mils)
    Plug on the ribbon cable spacing of 2.54 mm (100mils). conn.jpg
     
  2. shrtrnd

    shrtrnd

    3,826
    527
    Jan 15, 2010
    I'd use a magnifying glass and check the connector over closely to see if it has a company logo or identifying number stamped on it. If not, it'll be almost impossible to know who actually made it.
    If all else fails, you might try to contact the board manufacturer (the company that made your device),
    and see if you can get a replacement from them.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-