Maker Pro
Maker Pro

Which Touch Display?

mascail

May 26, 2014
8
Joined
May 26, 2014
Messages
8
Hey guys,

I am currently working on a project. It's a fitness wristband which has a lot of features. I will probably have some more questions regarding this topic in the future. But for now, I just got one. The device i want to build should have a Touch OLED Display and the dimensions should be around 20x500mm. The display should be similiar to the one of the Garmin Vivosmart www.garmin.com/vivosmart And I'd like it to be curved like this one too. My problem is that I have no idea where I can buy a similiar Display online. I can't find any sites.

Thanks in advance

Josh
 

hevans1944

Hop - AC8NS
Jun 21, 2012
4,886
Joined
Jun 21, 2012
Messages
4,886
Why not go to this site, buy one, then take it apart to reverse engineer it? Even if you can't put it back together, you will at least have the components you need. There might even be a makers mark on some of them.
 
Top