Connect with us

What's it do?

Discussion in 'Home Power and Microgeneration' started by steamer, Mar 21, 2010.

Scroll to continue with content
  1. steamer

    steamer Guest

    --Have been working on my mill and following instructions from the
    repair guy who's too far away to make a house call. I found this page: head rebuild web page/j head rebuild.htm
    ..and it's been a great help. Now in the second photo the guy's
    holding a dumbbell-shaped part called the pivot. In my mill this part had
    broken in the middle and lemmetellya getting the innermost piece out was a real
    adventure. Anyway I can't figure out what the thing does and I'm wondering
    what won't work if I just reassemble and leave the pivot out.
    Explanations appreciated.
  2. steamer

    steamer Guest

    --Disregard; posted to wrong newsgroup!!
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day