Connect with us

what makes a fluourscent tube fixture strobe?

Discussion in 'Lighting' started by TimR, Feb 19, 2013.

Scroll to continue with content
  1. TimR

    TimR Guest

    This morning we lost a phase to our small office building.

    In two offices the overhead tube fixture strobed. This was continuous and very bright. It looked like half the tubes strobed and the other half were dark. The wall switch (combined switch and motion detector) had no effect. They are on a 277 V circuit.

    I've been through a number of power failures including phase drops, but I've never seen this happen before.
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day