Maker Pro
Maker Pro

What is wrong with this

S

sunnie

Jan 1, 1970
0
I have posted here before and here goes again,

I took the blink file in cdlite and compiled it to a hex
I then took the hex and put it into microPro program that places the file
into the chip 16f84
I used a Kitsrus Kit 149 programmer.
When i load the file into the chip i get an error which says that
ROM Programming error at address 0x0001
Does anyone recognize this error and what does it mean

Frustrated and annoyed
Sunnie
 
D

david

Jan 1, 1970
0
I took the blink file in cdlite and compiled it to a hex
I then took the hex and put it into microPro program that places the file
into the chip 16f84
I used a Kitsrus Kit 149 programmer.
When i load the file into the chip i get an error which says that
ROM Programming error at address 0x0001
Does anyone recognize this error and what does it mean
I have not used the programmer or know what cdlite is.

Have you ever programmed a pic with this programmer before is it know to be
working ?
can you post the asm file does it compile to the right sort of hex file for
your programmer ?

have you emailed Kitsrus for help im sure they will have got used to similar
problems and know just how to solve them.

David
 
Top